Saturday, July 20, 2019
Chemistry Of Natural Water :: essays research papers
 The purpose of this experiment is to explore the  hardness of the water on campus. Hard water has  been a problem for hundreds of years. One of the  earliest references to the hardness or softness of  water is in Hippocrates discourse on water quality  in Fifth century B.C. Hard water causes many  problems in both in the household and in the  industrial world. One of the largest problems with  hard water is that it tends to leave a residue when  it evaporates. Aside from being aesthetically  unpleasing to look at, the build up of hard water  residue can result in the clogging of valves, drains  and piping. This build up is merely the  accumulation of the minerals dissolved in natural  water and is commonly called scale. Other than  clogging plumbing, the build up of scale poses a  large problem in the industrial world. Many things  that are heated are often cooled by water running  thru piping. The build up of scale in these pipes  can greatly reduce the amount of heat the cooling  unit can draw away from the source it is trying to  heat. This poses a potentially dangerous situation.  The build up of excess heat can do a lot of  damage; boilers can explode, containers can melt  etc. On the flip side of the coin, a build up of scale  on an object being heated, a kettle for example,  can greatly reduce the heat efficiency of the kettle.  Because of this, it takes much more energy to heat  the kettle to the necessary temperature. In the  industrial world, this could amount to large sums of  money being thrown into wasted heat. In addition  to clogging plumbing and reducing heating  efficiency, the build up of hard water also  adversely affects the efficiency of many soaps and  cleansers. The reason for this is because hard  water contains many divalent or sometimes even  polyvalent ions. These ions react with the soap  and although they do not form precipitates, they  prevent the soap from doing it's job. When the  polyvalent ions react with the soap, they form an  insoluble soap scum. This is once again quite  unpleasing to look at and stains many surfaces.  The sole reason for all these problems arising from  hard water is because hard water tends to have  higher than normal concentrations of these  minerals, and hence it leaves a considerable  amount more residue than normal water. The  concentration of these minerals is what is known  as the water's Total Dissolved Solids or TDS for  short. This is merely a way of expressing how  many particles are dissolved in water. The TDS  vary from waters of different sources, however  they are present in at least some quantity in all    					    
Subscribe to:
Post Comments (Atom)
 
 
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.